IHC Keystone Steel Pony Corn ShellerThe Keystone Pony corn sheller is one of the most simple, compact and efficient one-hole machines on the market. It will give better and longer service than is generally expected by the average purchaser. Its work is evidence of its worth. When once tried it will always be a part of the farm equipment. It is an ideal machine for the farmer who wishes to shell small quantities of corn from time to time for his own use. The frame is of malleable angle steel, and all panels, partitions, plates, etc., are of sheet steel. This steel construction not only gives greater strength, but insures a much more durable machine. The decaying of wood frame parts and the constant loosening of joints are entirely eliminated. The frame pieces and side panels are securely riveted together, while the top and end plates are so bolted that if it should at any time be necessary to get at the working parts, the sheller may be easily taken apart and assembled again accurately. All bearings are machined to fit and the workmanship throughout is in every way equal to that of the larger and more expensive machines. It is neat in design and carefully finished. All gearing is placed within the body of the machine in order to remove any possibility of accident to the operator. |
There's a WHOLE LOT more to this site so click and cruise around!
ENGINES | SHOWS | SEARCH | SUPPLIERS | IGNITIONS | ABRASIVES | CLASSIFIEDS | BOOKS |
Published by Harry F. Matthews © 1995 - 2000. ALL RIGHTS RESERVED!